Terms and Conditions

Delivery

Prices include delivery to mainland UK excluding Northern Ireland, Channel Islands and Scottish Islands. For delivery to any of the above, Ireland and mainland Europe please contact the office prior to order to confirm charges.

terms1
Per Delivery requirements

Remember, we deliver, install and commission your hot tub for you However there are a few things we can’t cover.

ACCESS. To get your hot tub from the street into your premises, we need adequate space on a flat unrestricted pathway. The spa dolly requires to move freely and unrestricted to get your hot tub safely to where it will be installed.

MINIMUM HEIGHT: 2.6 METERS

MINIMUM WIDTH: 1.1 METERS

If you are unsure, we can advise.

 

level
STRONG, LEVEL BASE. Your hot tub requires a flat level surface strong enough to hold the weight when filled with water and bathers, a typical Hot Tub holds 1500 of water and the combined weight with 6 bathers will be around 2500kg.

Recommended bases are: Concrete slab, block paving, well supported wooden decking.

CERTIFIED ELECTRICIAN. An Approved electrician is required to install the power supply from the main power source to your tub, Any new circuit should comply with the current electrical requirements (17th edition Part P) and should be tested and signed off by a Select/Nic member.

ALL ELECTRICAL WORK MUST BE COMPLETED PRIOR TO INSTALLATION

Will make the final connection into the hot tub on the day of installation.

 

Hardware required to be installed by your electrician.

1. Steel Wire Armoured cable – 3 core: 10mm, 6mm, or 4mm, Depending on cable length.There must be a minimum of 3 meters of cable at the Hot Tub installation position to allow connection inside the Hot Tub.

2. Dedicated RCD protection

3. IP65 45amp Isolator switch local to Hot Tub.